2.1
The EM&A Manual designates several locations
representative of the identified sensitive receivers for the ET to monitor
environmental impacts in terms of air quality, noise and water quality due to
the Project. The Project area,
monitoring locations and sensitive receivers are depicted in Figures 2.1 to
2.5. Appendix C gives details of monitoring
requirements.
Monitoring Methodology and
Calibration Details
2.2
All monitoring works were conducted and
monitoring equipment was regularly calibrated in accordance with the EM&A
Manual. Copies of calibration certificates are attached in Appendix D.
Environmental Quality
Performance Limits (Action and Limit Levels)
2.3
The environmental quality performance limits,
i.e. Action and Limit Levels (AL Levels) were derived from the baseline
monitoring result. Should the measured environmental quality parameters exceed
the AL Levels, the respective action plan will be
implemented. The AL Levels for each environmental parameter are given in
Appendix E.
Environmental Mitigation Measures
2.4
Relevant mitigation measures were recommended in
the EM&A Manual for the Contractor to implement. A list of mitigation
measures is given in Appendix F.