TABLE OF CONTENTS

EXECUTIVE SUMMARY

Introduction

Environmental Monitoring Works

Environmental Licenses and Permits

Key Information in the Reporting Quarter

1. INTRODUCTION

Background

Project Organizations

2. ENVIRONMENTAL MONITORING AND AUDIT REQUIREMENTS

Monitoring Parameters and Monitoring Locations

Monitoring Methodology

Environmental Quality Performance Limits (Action and Limit Levels)

Implementation Status of Environmental Mitigation Measures

Site Audit Summary

Status of Waste Management

3. MONITORING RESULTS AND NON-COMPLIANCE (EXCEEDANCES) OF THE ENVIRONMENTAL QUALITY PERFORMANCE LIMITS (ACTION AND LIMIT LEVELS)

Weather Conditions

Air Quality

Construction Noise

Landscape and Visual

Influencing Factors on the Monitoring Results

Comparison of EM&A results with EIA predictions

4. COMMENTS, CONCLUSIONS AND RECOMMENDATIONS

Review of the Reasons for and the Implications of Non-compliance

Review of Monitoring Methodology and the Practicality and Effectiveness of EM&A Programme

Effectiveness of Mitigation Measures

Recommendations

LIST OF TABLE

Table I Summary Table for Non-compliance Recorded in the Reporting Quarter

Table II Summary Table for Key Information in the Reporting Quarter

Table 1.1 Key Project Contacts

Table 2.1 Status of Required Submissions under EP

Table 3.1 Major Noise Sources during the Monitoring in the Reporting Period

LIST OF FIGURES

Figure 1 Layout Plan of the Project

Figure 2 Locations of Construction Noise Monitoring Stations

LIST OF APPENDICES

A Construction programme

B Monitoring Requirements

C Action and Limit Levels for Noise

D Noise Monitoring Results and Graphical Presentations

E Environmental Mitigation Implementation Schedule (EMIS)

F Site Audit Summary

G Monthly Summary Waste Flow Table

H Summary of Exceedances

LIST OF ANNEXES

Annex I Comparison of EM&A Data and EIA Predictions